Sectional Insulated Steel Door
The Raynor TM200C commercial sectional insulated steel door provides the same great quality and durability you get from all ThermaSeal models, with the added benefit of multiple colors to choose from. This 2” thick door is a great option for energy efficiency with an 18.0 R-value.
TM200C Features and Options
Raynor ThermaSeal TM200C commercial doors are available with numerous features and options, including those listed below.
Maximum Thermal Protection
Energy-saving polyurethane foam insulation is used to deliver exceptional R-values.
Rugged Hardware and Springs
Your ThermaSeal TM200C door comes packaged with the right combination of long-lasting hardware, track, and springs to precisely match your door’s size and application.
WeatherLock™ Section Joints
13 Colors to Choose From
The same great quality and durability you get from all ThermaSeal models, with the added benefit of 13 colors to choose from. (See Colors Tab below for details.)
Choice of Windows
High-cycle Counterbalance Systems
For reliable operation in high traffic areas, choose high-cycle torsion springs with 25,000, 50,000 or 100,000-cycle life.* For reduced maintenance and ultra-smooth operation in heavy-use applications, choose a weight counterbalance system. *Some options may be limited to door size or model.
Customized Track and Hardware Systems
Carbon Monoxide Vent
Allows you to channel fumes to the outside when the door is closed. Available in a variety of sizes.
Swing-up options are available for extra-wide openings. Ideal for agricultural or airplane hangar applications.
Raynor ThermaSeal TM200C commercial doors are available in the following colors.
>>Not all colors are available on all embossments. Contact your local Raynor Authorized Dealer for a complete listing of colors available by embossment.
>>The swatches shown on monitors, mobile devices, and printed materials may vary from the actual steel color. Contact your local Raynor Authorized Dealer for color samples.
|Type||Commercial Sectional Insulated Steel Garage Doors|
|Size||20′ x 16′ Max|
|Operation||Manual, Motor or Hand Chain|
|Surface Texture||Stucco Exterior pencil groove; Stucco Interior pencil groove|
|Gauge||Steel; Exterior: 26-Gauge; Interior: 27-Gauge|
|Insulation||Polyurethane (18.0 R-value)|
|Seals||Thermal Break, Bottom Seal (3″, 4″ EPDM, or 3″ Yellow); Optional Header Seal.|
|Trussing||Wind Load: 15 P.S.F. Tested/10 P.S.F. Design Load (standard); Material: U-bar (18-Gauge or 20-Gauge)|
|Color||Almond, Bronze Tone, Brown, Battleship Gray, Charcoal, Desert Tan, Ivory, Sandstone, Black, Slate, Frost White, Beige, Sepia.|
|Windows||Select either 24″ x 8″, 24″ x 12″, rigid frame fullview window in 34″ x 16″. Also available with aluminum full-view window sections. Choose from clear insulated glass and clear insulated tempered.|
|Type||Normal Headroom, Rear Mount Low Headroom, Front Mount Low Headroom, Lift Clearance, Vertical Lift, Incline, Contour, and QuikClip™ Pre-Assembled Track Options|
|Size||2″ or 3″|
|Type||Torsion Spring, Tandem Shaft Torsion Spring, or Weight Counterbalance|
|Springs||Spring Inner Diameter: 2-1/4″, 3-1/2″ or 5-1/2″; Duplex or High Cycle (30K, 50K, 100K)|
|Shafts||Tube (13-Gauge) or Solid (D-Shaft, 1″ Keyed, 1-1/4″ Keyed)|
|Hinges||11, 13, 14-Gauge or Hybrid|
|Rollers||Standard (2″ or 3″) or Heavy Duty (2″ or 3″)|
|Lock||Interior Slide Lock or Exterior Lock Bars|
|Seal(s)||Header Seal or Jamb Seal|
|Hanger Angle||11, 13, 16-Gauge|
Specifications and Drawings
|Word Document||PDF document|
|Raynor Quick Spec||Microsoft Word Document||PDF Document|
|CSI Master Format||Microsoft Word Document||PDF Document|
ThermaSeal Series Warranty
Raynor® warrants the door sections against defects in material and workmanship, and deterioration due to rust-through for ten (10) years from date of delivery to the original purchaser. Raynor also warrants the door sections against delamination of the polyurethane foam insulation from the steel skins for ten (10) years from date of delivery to the original purchaser. Window components are warranted against defects in material and workmanship for one (1) year from date of delivery to the original purchaser.
HARDWARE and SPRINGS
Raynor warrants all hardware and spring components against defects in material and workmanship for one (1) year from date of delivery to the original purchaser.
ColorWave™ Post Paint Process
Raynor warrants the ColorWave post paint process (exterior only) against chipping, cracking, and/or peeling (losing adhesion), for a period of (5) five years from the date of delivery to the original purchaser. Fading and chipping, cracking, or peeling caused by dents or scratches is not covered under this warranty.
WARRANTY LIMITATIONS and EXCLUSIONS
Under the terms of this limited warranty, for any door components that are found to be defective upon inspection by authorized Raynor personnel, Raynor will, at its option, repair or replace the defective door components. Labor charges for the installation or repairs shall be the responsibility of the consumer and must be performed by a qualified installer. This warranty applies only to doors that are professionally installed by a qualified installer.
This warranty extends only to the original purchaser, provided the door is installed in his/her place of business. This warranty is not transferable.
This warranty does not apply to any damage or deterioration to the door caused by abuse, negligence, missing components, accidents, use of pressure washers, dents or scratches. Shavings from trolley rails not properly removed and cleaned from the exterior door surface causing rust are not covered by this warranty. Failure to provide proper maintenance voids this warranty. Field applied paint failure is not covered by this warranty. Refer to the Care and Maintenance Instructions and Painting Instructions.
This warranty does not apply to damage caused by fire, an act of God, accident, vandalism or graffiti. Damage or deterioration caused by saltwater coastal areas (within two miles), hazardous or corrosive chemicals and fumes including, but not limited to, alkaline, acids, muriatic acids, road salt or salt environments, harsh cleaning agents, and fertilizers is not covered by this warranty.
Raynor shall not be liable for any consequential or incidental damages.
ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANT OF MERCHANTABILITY, ARE HEREBY EXPRESSLY EXCLUDED.
Some states do not allow the exclusion or limitation of consequential or incidental damages, so the above limitation or exclusion may not apply to you.
Claims for defects in material and workmanship covered by this warranty shall be made in writing with proof of purchase and photographs of the product in question to the dealer from whom the product was purchased or call Raynor at 1-800-4-RAYNOR within the warranty period. Raynor may choose to have the product returned for inspection.
This warranty gives you specific legal rights. You may also have other rights, which may vary from state to state.