Thermal Sectional Doors
The Raynor TC224 two-sided steel sandwich sectional door offers all of the same features and benefits as the TC200 with a thicker 24-gauge exterior skin. Available in white and dark brown, this 2″ thick thermal door provides a 10.25 R-value and polystyrene insulation. The TC224 is a tougher thermal door perfect for loading dock and warehouse applications.
TC224 Features and Options
Raynor TC224 commercial doors are available with numerous features and options, including those listed below.
TC224 windows use 1/8” DSB, insulated glass and are available in several options: 24”x8”, 24”x12”, 34”x16” colonial, ranch, full view colonial style aluminum section, and full view ranch style aluminum section.
Vinyl thermal break between interior and exterior skins, along with a section joint seal prevent weather infiltration.
>>The swatches shown on monitors, mobile devices, and printed materials may vary from the actual steel color. Contact your local Raynor Authorized Dealer for color samples.
Optional Post Paint Process
Raynor’s ColorWave™ features Sherwin-Williams® next generation post paint system for your garage door. With 1,500 colors to choose from, home and business owners can couple this elite paint system with state of the art Raynor manufacturing to craft the perfect look for their home or project.
|Size||18′ x 16′ Max|
|Operation||Manual, Motor or Hand Chain|
|IECC Thermal Performance||N/A|
|Surface Texture||Stucco Exterior, Stucco Interior|
|Gauge||Steel; Exterior: 24-Gauge; Interior: 26-Gauge|
|Insulation||Expanded Polystyrene (10.25 R-value)|
|Seals||Thermal Break, Header Seal, Bottom Seal (3″, 4″ EPDM, or 3″ Yellow)|
|Trussing||Wind Load: 15 P.S.F. Tested/10 P.S.F. Design Load (standard); Material: U-bar (18-Gauge or 20-Gauge)|
|Color||White and Dark Brown. Raynor’s ColorWave™ with 1,500 Sherwin-Williams® colors.|
|Windows||TC224 windows use 1/8″ DSB, insulated glass and are available in several options: 24″x8″, 24″x12″, 34″x16″ colonial, ranch, full view colonial style aluminum section, and full view ranch style aluminum section.|
|Type||Normal Headroom, Rear Mount Low Headroom, Front Mount Low Headroom, Lift Clearance, Vertical Lift, Incline, Contour|
|Finish||Galvanized or Optional White Powder Coat|
|Size||2″ or 3″|
|Gauge||12, 13, 16-Gauge|
|Type||Torsion Spring, Tandem Shaft Torsion Spring, or Weight Counterbalance|
|Springs||Spring Inner Diameter: 2-1/4″, 3-1/2″ or 5-1/2″; Duplex or High Cycle (30K, 50K, 100K); Optional Black Powder Coat|
|Shafts||Tube (13-Gauge) or Solid (D-Shaft, 1″ Keyed)|
|Hinges||11, 13, 14-Gauge or Hybrid|
|Rollers||Standard (2″ or 3″) or Heavy Duty (2″ or 3″)|
|Finish||Galvanized or Optional White Powder Coat|
|Lock||Interior Slide Lock or Exterior Lock Bars|
|Hanger Angle||11, 13-Gauge Galvanized|
|Optional Wind Loading||Certified Wind Load Available|
|Posts||Swing-Up or Carry-Away|
|Section Warranty||10-Year Rust-Through and Delamination|
Specifications and Drawings
|Word Document||PDF document|
|Raynor Quick Spec||Microsoft Word Document||PDF Document|
|CSI Master Format||Microsoft Word Document||PDF Document|
Section and Panel Schedules
|Door Height||Number of Sections|
|4′ 9″ – 6′ 0″||3|
|6′ 1″ – 8′ 0″||4|
|8′ 1″ – 9′ 9″||5|
|9′ 10″ – 11′ 3″||6|
|11′ 4″ – 13′ 0″||7|
|13′ 1″ – 16′ 0″||8|
Raynor® warrants the door sections against defects in material and workmanship, and deterioration due to rust-through for ten (10) years from date of delivery to the original purchaser. Raynor also warrants the door sections against delamination of the polystyrene insulation from the steel skins for ten (10) years from date of delivery to the original purchaser. Window components are warranted against defects in material and workmanship for one (1) year from date of delivery to the original purchaser.
HARDWARE and SPRINGS
Raynor warrants all hardware and spring components against defects in material and workmanship for one (1) year from date of delivery to the original purchaser.
ColorWave™ Post Paint Process
Raynor warrants the ColorWave post paint process (exterior only) against chipping, cracking, and/or peeling (losing adhesion), for a period of (5) five years from the date of delivery to the original purchaser. Fading and chipping, cracking, or peeling caused by dents or scratches is not covered under this warranty.
WARRANTY LIMITATIONS and EXCLUSIONS
Under the terms of this limited warranty, for any door components that are found to be defective upon inspection by authorized Raynor personnel, Raynor will, at its option, repair or replace the defective door components. Labor charges for the installation or repairs shall be the responsibility of the consumer and must be performed by an authorized Raynor dealer.
This warranty extends only to the original purchaser, provided the door is installed in his/her place of business. This warranty is not transferable.
This warranty does not apply to any damage or deterioration to the door caused by abuse, negligence, missing components, accidents, use of pressure washers, dents or scratches. Shavings from trolley rails not properly removed and cleaned from the exterior door surface causing rust are not covered by this warranty. Failure to provide proper maintenance voids this warranty. Field applied paint failure is not covered by this warranty. Refer to the Care and Maintenance Instructions and Painting Instructions.
This warranty does not apply to damage caused by fire, an act of God, accident, vandalism or graffiti. Damage or deterioration caused by saltwater coastal areas (within two miles), hazardous or corrosive chemicals and fumes including, but not limited to, alkaline, acids, muriatic acids, road salt or salt environments, harsh cleaning agents, and fertilizers is not covered by this warranty.
Raynor shall not be liable for any consequential or incidental damages.
ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANT OF MERCHANTABILITY, ARE HEREBY EXPRESSLY EXCLUDED.
Some states do not allow the exclusion or limitation of consequential or incidental damages, so the above limitation or exclusion may not apply to you.
Claims for defects in material and workmanship covered by this warranty shall be made in writing with proof of purchase and photographs of the product in question to the dealer from whom the product was purchased or call Raynor at 1-800-4-RAYNOR within the warranty period. Raynor may choose to have the product returned for inspection.
This warranty gives you specific legal rights. You may also have other rights, which may vary from state to state.