AlumaView® AV300
Aluminum Sectional Rail and Stile Doors
A full 3″ thick, the Raynor AlumaView AV300 aluminum sectional rail and stile door is the sturdiest door in the AlumaView family. The increased thickness adds strength and durability. With the incorporation of the U-bar trussing inside the rails, there are no obstructions to your view.
The AV300 is the clear choice for auto dealerships, car washes, corrosive environments, police, fire and ambulance stations, quick lubes, repair facilities, restaurants, marinas, sports facilities, and buildings with large opening sizes.
AV300 Features and Options
Raynor AlumaView AV300 aluminum sectional rail and stile doors are available with numerous features and options, including those listed below.
Years of Durability
AlumaView AV300 door sections are clear-anodized for maximum durability and are designed to withstand minimum wind loads of 20 p.s.f. Higher pressure ratings are available upon request.
Rugged Hardware and Springs
The AlumaView AV300 door comes packaged with the right combination of hardware, track, and springs to match your door’s size and application.
Decreased Energy Costs
AlumaView doors help you reduce energy costs with a U-shaped, vinyl bottom weatherseal secured by a sturdy aluminum retainer.
Snap-in Retainer
AlumaView AV300 panels and glass are sealed and held in place with a snap-in retainer. Clear anodized, RAL9003, RAL 9016 and standard white doors use gray snap-ins. All other doors use black snap-ins.
Integral U-Bar
Integral U-bar construction within the rails of the AV300 creates added strength to the section panels and provides for a clean look on the interior of the door by removing trussing obstructions from visible areas (only required for doors wider than 18’2″).
Header Seal
Flexible vinyl flap header seal reduces air infiltration and energy costs by sealing the top of the door against the header.
Jamb Seal
EPDM rubber jamb seal also helps to reduce air infiltration and decrease energy costs by sealing the side of the door when closed.
Choice of Windows
Available in impact glass, tempered, tinted, double pane, insulated, acrylic, or polycarbonate in a variety of thicknesses. Glass thickness range from 1/8″ to 1″.
EnduraCote™
The Raynor EnduraCote hardware system comes with springs, tracks, and hardware that are powder coated to provide a clean, finished look and maximum protection against rust.
SleekSightline™
Our AV200 and AV300 models offer a sleek 1-pane or trendy 2-pane glass layout. These new glass layouts are available now and vary depending on glass type and door size.
Aluminum Panels
For busy work environments and to prevent glass breakage, aluminum panels protect your investment. Choose from insulated panels, kick panels, and impact-rated panels as well.
High-cycle Counterbalance System
For reliable operation in high traffic areas, choose high-cycle torsion springs with 25,000, 50,000, or 100,000-cycle life. For reduced maintenance and ultra-smooth operation in heavy-use applications, choose a weight counterbalance system.
Locks
In applications where control and access are important, choose from a variety of locking options to help keep your building secure. Locks come in both inside and outside variations.
Carbon Monoxide Vent
Allows you to channel fumes to the outside when the Raynor AlumaView AV300 door is closed. Available in a variety of sizes.
Customized Track*
Track systems are supplied to fit special clearances, inclines, or contour applications. Hardware and track systems can be customized to fit any need. Additional trussing is available for special wind loading applications. A QuikClip™ pre-assembled track option is also available.
*Some options may be limited to door size or model.
Anodized Finishes
Choose from six custom anodize finishes including champagne, light bronze, medium bronze, dark bronze, extra dark bronze, or black.
IECC Requirements Package/California Title 24
Elegant Finish Woodtones™
Colors
Anodized Finish Options
ArmorBrite™ Powder Coat System
Custom Colors: ArmorBrite: 188 custom powder coated colors available.
Elegant Finish Woodtones™ Options
Product Details
| Door | ||
| Model | AlumaView AV300 | |
| Size | 24′ x 24′ Max | |
| Operation | Manual, Motor or Hand Chain | |
| IECC Thermal Performance | Tested Air Infiltration @ 25 mph 0.21 cfm/ft2 Tested U-Factor 0.83 (w/ 1″ thick, insulated, Low E glass) |
|
| Sections | ||
| Construction | Rail & Stile – minimum .063″; 5/16″ diameter screws | |
| Material | Aluminum | |
| Surface Texture | Smooth | |
| Section Joint | Tongue and Groove | |
| Section Thickness | 3″ | |
| Gauge | N/A | |
| Stiles | Extruded aluminum – minimum .05″ | |
| Insulation | 3/8″ Expanded Polystyrene (in panels only) | |
| Seals | Bottom Seal (3″, 4″ Gray; 3″ Yellow; or 3″ Black EPDM), Optional Header Seal. Optional IECC and California Title 24 air filtration compliant package available. | |
| Trussing | Wind Load: 20 P.S.F. Tested/13.3 P.S.F. Design Load (standard); Material: U-bar (18-Gauge or 20-Gauge);Sizes: 4″, 6″, or 8″ | |
| Panel Configuration | .50″ thick Aluminum panels | |
| Color | Clear and Optional Anodized Finishes, ArmorBrite Powder Coat System, or Elegant Finish Woodtones | |
| Windows | 1/8″ DSB Glass; 1/8″ 1/4″ 3/16″ Clear Tempered Glass; 1/8″ 1/4″ Tinted or Tinted Tempered Glass; 3/16″ 1/4″ Clear Glass; 1/4″ Clear Laminated Glass; 1/4″ Clear Wire Glass; 1/2″ Insulated DSB Glass; 1” glass available in Insulated Clear, Insulated Clear Tempered, Insulated Low E Annealed, Insulated Low E Tempered, Insulated Satin Tempered, and Special Glass Available for Order (Please Note: 1” Insulated Glass is Made up of Two Panes of 1/8” Glass with a ¾” air space.) | |
| Track | ||
| Type | Normal Headroom, Rear Mount Low Headroom, Front Mount Low Headroom, Lift Clearance, Vertical Lift, Incline, Contour, and QuikClip™ Pre-Assembled Track Options | |
| Finish | Galvanized or Optional White Powder Coat | |
| Size | 2″ or 3″ | |
| Gauge | 13 and 16-Gauge | |
| Counterbalance System | ||
| Type | Torsion Spring, Tandem Shaft Torsion Spring, or Weight Counterbalance | |
| Springs | Spring Inner Diameter: 2-1/4″, 3-1/2″ or 5-1/2″; Duplex or High Cycle (30K, 50K, 100K); Optional Black Powder Coat | |
| Shafts | Tube or Solid (D-Shaft, 1″ Keyed, 1-1/4″ Keyed) | |
| Hardware/Accessories | ||
| Hinges | 11, 13, 14-Gauge or Hybrid | |
| Rollers | Standard (2″ or 3″) or Heavy Duty (2″ or 3″) | |
| Finish | Galvanized or Optional White Powder Coat | |
| Lock | Interior Slide Lock or Exterior Lock Bars | |
| Seal(s) | Jamb Seal | |
| Hanger Angle | 11, 13-Gauge Galvanized or 13-Gauge White Powder Coated | |
| Pedestrian Door | NA | |
| Optional Wind Loading | Certified Wind Load Available | |
Specifications
Select a link below to download AlumaView AV300 specifications and drawings.
| Word | Drawings | ||
| AV300 Product Specs | DOCX | ||
| AV Series Product Line Specs | DOCX | ||
| Full Sectional Product Line Specs | DOCX | ||
| BIM Objects | DWG | RFA |
Standard Drawings
| 2-inch Track/Bracket-Mounted | ||
| Normal Headroom | DWG Drawing | |
| Lift Clearance | DWG Drawing | |
| Vertical Lift | DWG Drawing | |
| Low Headroom Front-Mount | DWG Drawing | |
| Low Headroom Rear-Mount | DWG Drawing | |
| 2-inch Track/Angle-Mounted | ||
| Normal Headroom | DWG Drawing | |
| Lift Clearance | DWG Drawing | |
| Vertical Lift | DWG Drawing | |
| Low Headroom Front-Mount | DWG Drawing | |
| Low Headroom Rear-Mount | DWG Drawing | |
| 3-inch Track/Angle-Mounted | ||
| Normal Headroom | DWG Drawing | |
| Lift Clearance | DWG Drawing | |
| Vertical Lift | DWG Drawing | |
| Low Headroom Front-Mount | DWG Drawing | |
| Low Headroom Rear-Mount | DWG Drawing | |
Technical Information
Section and Panel Schedules
| Door Width | Number of Panels | Door Height | Number of Sections | |
|---|---|---|---|---|
| Up to 9’2″ | 2 |  | Up to 8’2″ | 4 |
| 9′ 3″ – 12′ 2″ | 3 | 8′ 3″ – 10′ 6″ | 5 | |
| 12′ 3″ – 16′ 2″ | 4 | 10′ 7″ – 12′ 6″ | 6 | |
| 16′ 3″ – 20′ 2″ | 5 | 12′ 7″ – 14′ 6″ | 7 | |
| 20′ 3″ – 24′ 2″ | 6 | 14′ 7″ – 16′ 6″ | 8 |
Product Literature
AlumaView Warranty
DOOR SECTIONS
Raynor® warrants the door sections against defects in material and workmanship for five (5) years from date of delivery to the original purchaser. Window components are warranted against defects in material and workmanship for three (3) years from date of delivery to the original purchaser.
HARDWARE
Raynor® warrants all hardware against defects in material and workmanship for one (1) year from date of delivery to the original purchaser.
SPRINGS
Raynor® warrants springs against defects in material and workmanship for one (1) year from date of delivery to the original purchaser. The limited warranty for special high-cycle springs is prorated by percentage of cycle use, and must be determined by the use of a non-resettable cycle counter.
ArmorBrite™
Doors equipped with AmorBrite powder coat carry a warranty against cracking or peeling (losing adhesion) for three (3) years from date of delivery to the original purchaser.
Elegant Finish Woodtones™
Single Family Residential and All Other Residential (including installation on rental properties, homes owned by common condominiums associations or similar organizations):
5-Year Elegant Finish Woodtones Limited Warranty
For a period of 5 years, Raynor warrants the appearance of aluminum sections made with Elegant Finish Woodtones per the specifications set forth per AAMA 2604:
- Product coated will not fade in color more than 5 ΔE units as measured by Hunter Lab color difference as set forth per AAMA 2604 specifications as of the application date and in such way as to significantly adversely affect the appearance of the surface to which the product has been applied and result in damage to the surface.
- Coated surface will exhibit gloss retention of a minimum of 30% of the original using a 60 degree reading per AAMA 2604 specifications.
- Coating shall not chalk in excess of standard number 8 as illustrated in the ASTM D4214 test method A.
Woodtone finishes may vary across a section due to material runs at the supplier, environmental, chemical, or equipment variations and are not considered a manufacturing defect and do not constitute a basis for complaint under this limited warranty. Color match on new or replacement section(s) is not warrantied nor guaranteed. As with real wood products, simulated woodtone doors will have variation in color finish. These are normal to the manufacturing process and add to the characteristic individual nature of the product.
WARRANTY LIMITATIONS and EXCLUSIONS
Under the terms of this limited warranty, for any door components that are found to be defective upon inspection by authorized Raynor personnel, Raynor will, at its option, repair or replace the defective door components. Labor charges for the installation or repairs shall be the responsibility of the consumer and must be performed by a qualified installer. This warranty applies only to doors that are professionally installed by a qualified installer.
This limited warranty extends only to the original purchaser, provided the door is installed in the original purchaser’s place of business. This limited warranty is not transferable. This limited warranty does not apply to any damage or deterioration to the door caused by abuse, negligence, missing components, accidents, use of pressure washers, dents or scratches. Shavings from trolley rails not properly removed and cleaned from the exterior door surface causing rust are not covered by this warranty. Failure to provide proper maintenance voids this limited warranty. Field applied paint failure is not covered by this limited warranty. Refer to the Care and Maintenance Instructions and Painting Instructions. This limited warranty does not apply to damage caused by fire, an act of God, accident, vandalism or graffiti. Damage or deterioration caused by saltwater coastal areas (within two miles), hazardous or corrosive chemicals and fumes including, but not limited to, alkaline, acids, muriatic acids, road salt or salt environments, harsh cleaning agents, and fertilizers are not covered by this limited warranty. This limited warranty does not apply to building damage caused by moisture infiltration through or around the door. A garage door system is water-resistant, but not waterproof. When a garage door system is properly assembled, installed, and maintained the risk of significant water infiltration is low. Raynor shall not be liable for any consequential or incidental damages. ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY EXCLUDED. Some states do not allow the exclusion or limitation of consequential or incidental damages, so the above limitation or exclusion may not apply to you. Claims for defects in material and workmanship covered by this warranty shall be made in writing with proof of purchase and photographs of the product in question to the dealer from whom the product was purchased or call Raynor at 1-800-4-RAYNOR within the warranty period. Raynor may choose to have the product returned for inspection. This limited warranty gives you specific legal rights. You may also have other rights, which vary from state to state.